Description: The Kleenoil USA filtration unit is made of cast aluminum with a galvanized steel mounting bracket. There are three basic sizes, which are installed according to the applications table below. It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.

Kleenoil Filtration Unit Specifications Table
Super Duty Cartridges	Light Duty Filtration Unit		Heavy Duty Filtration Unit		Heavy Duty EGR Filtration Unit		Super Duty Filtration Unit
Code Number	Unit	Cartridge	Unit	Cartridge	Unit	Cartridge	Unit	Cartridge
Code Number	KU16	KF16	KU50	KF50	KU65	KF65	KU85	KF85
Engine Sump Capacity	Up to 16 Quarts		Up to 50 Quarts		Up to 65 Quarts		Up to 90 Quarts
Hydraulic Tank Capacity	Up to 60 Gallons		Up to 200 Gallons		Up to 300 Gallons		Up to 400 Gallons
Water Retention <0.05%	0.07 Gallons		0.12 Gallons		0.20 Gallons		0.26 Gallons
Height	6.25 inches	4.13 inches	6.50 inches	4.13 inches	6.25 inches	4.13 inches	6.63 inches	4.13 inches
Diameter	4.63 inches	4.13 inches	7.25 inches	5.75 inches	9.50 inches	7.25 inches	10.00 inches	7.75 inches
Type of Usage	Smaller Engines, Small Hydraulic Systems		Regular Engines, Hydraulic Systems, Diesel Fuel Filtration		Diesel EGR Engines, Hydraulic Systems, Diesel Fuel Filtration		Larger Engines, Hydraulic Systems, Diesel Fuel Filtration
Pressures	Maximum rating of 10 bar. Lid torque is 23 lbs/foot.
Oil Flow Rate	Output levels are dependent on the viscosity, temperature, and degree of contamination and oil pressure. (Guide for SAE 15W40 oil at 158 degrees F and 60psi, the flow rate would be 0.55 gpm to 0.81 gpm)
Operating Temperatures	Within operating specifications of engine, gear, and hydraulic oils.
Filtration Level	Particulate contamination in accordance with BS 5540 part 4: 1981 and ISO/DIS 4406. ISO 14/9 equivalent to NAS 1638 class 6 - hydraulic oil specification.
Castings	Constructed of aluminum to BS 1490 (M) Subjected to batch and individual testing.