We at Schooner Transport are always looking for new technology to help reduce the costs associated with running a transport fleet. We have been using oil analysis as a key tool to help extend our drain intervals on our oil changes.
Since we have switched to Chevron Delo 400 with the help of Kleenoil Filtration Systems, we have twice had oil samples return a admirable report after running the unit's over the 100,000 km mark.
We would not hesitate to in...
| Kleenoil Onboard Oil Recycling Systems |
|
|
|
|
The Kleenoil Onboard Oil Recycling System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 2 to 3 quarts per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing engine wear and prolonging oil life. Kleenoil can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.
The Kleenoil USA filtration unit is made of cast aluminum with a galvanized steel mounting bracket. There are five basic sizes, which are installed according to the applications table below. It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.
|