Register
Home 
Products
Products
Kleenoil Testimonials
Rob Sapanara
Date: Sep 28, 2001
I’m the owner of the Brooklyn VI, a one hundred and ten foot long party boat out of Sheepshead Bay, Brooklyn. It is powered by three 1292 Detroit Diesels, each putting out 815 horse power. Using NNL 690 and Gen 49D, I noticed a difference in both power and fuel economy. On my first trip after adding NNL 690 and Gen 49D, I had a 12% fuel savings which equaled 200 gallons of diesel and the engines ran smoother and did not seem to run as hot. I believe that this is because the entire system...
Date: Sep 28, 2001
I’m the owner of the Brooklyn VI, a one hundred and ten foot long party boat out of Sheepshead Bay, Brooklyn. It is powered by three 1292 Detroit Diesels, each putting out 815 horse power. Using NNL 690 and Gen 49D, I noticed a difference in both power and fuel economy. On my first trip after adding NNL 690 and Gen 49D, I had a 12% fuel savings which equaled 200 gallons of diesel and the engines ran smoother and did not seem to run as hot. I believe that this is because the entire system...
| Kleenoil Onboard Oil Recycling Systems |
 |
 |
 |
|
The Kleenoil Onboard Oil Recycling System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 2 to 3 quarts per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing engine wear and prolonging oil life. Kleenoil can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.
The Kleenoil USA filtration unit is made of cast aluminum with a galvanized steel mounting bracket. There are five basic sizes, which are installed according to the applications table below. It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.
 |
